We have a long track record of projects, with references, ranging across all market segments, substrate types and environmental conditions. Check out our recent projects.

Nukote Coating Systems Projects

Galfar/ Swstik Lloyds, the contractors for the projects, were looking for an ideal solution for coatings on the bends & other fittings. Nukote HT was suggested and accepted as the most suitable solution, keeping in mind the economic cost and the execution time.

The pipe fittings were abrasive blasted to Sa2.5 and further treated with Nukote Metal Prime II primer. The final coating of Nukote HT pure aromatic polyurea was spray applied to a DFT of 2 mm on the surface. The coating was checked for consistency in DFT and Holiday (Spark) Testing was also carried out.

Coating on Pipe Fittings- Anti Corrosion, Taloja (Mumbai)

Metal Prime II

Nukote HT @ 2mm DFT

The poured concrete was grinded and primed with penetrating Epoxy primer and then leveled with epoxy mortar. The surface was then coated with 1.5 mm of hot-applied pigmented Polyurea NUKOTE-HT in dark gray color. This product was chosen because of its fast back in service and curing time, and also excellent mechanical and waterproofing properties. After the application of Polyurea flooring system Polyurethane flooring, was applied in some special places with different colors for reaching a better view and separating some special zones, and also for striping.

Flooring system in Rose Mirdamad parking structure

Nukote HT

The project utilized the tried and tested Nukote composite System as a primary waterproofing barrier suitable for Aquatic habitat. The substrate was prepared by wet slurry blasting and all concrete repairs were carried out with dedicated epoxy mortars. The substrate was Pre-treated with Nukote HLT as an hydrostatic barrier, primed with Nukote EP II primer followed by 2mm of Nukote ST (Pure Polyurea) and top coated with color and UV stable VOC free Nukote PA II, a Polyaspartic coating at 350 microns.

Waterproofing for an Aquatic habitat in Ukraine

Nukote PA II

Nukote ST

Nukote HLT

In this case, the main problem was that the expansion joints were not designed correctly and didn't have a suitable joint sealant. This problem had caused cracks and severe destruction in band & runway surfaces. All deteriorated concrete sections were repaired with Epoxy grouts. Then the joints walls were cut to achieve standard width and evacuated of any loose particles. A suitable vapor barrier was applied on clean surfaces inside the joints and on the area of 2 meters around the joints. At the end Polyurea NUKOTE –ST was applied as a final Coating and then all of the joints were filled with Polyurea NUKOTE-BG, NUKOTE-ST was chosen as protective flooring because of its anti-slip surface, fastback in service excellent mechanical resistance, strong chemical resistance, and good abrasion resistance. The project was done while the runway was in full service.

Repairing the deteriorated concrete and application of high performance coating on the airport runway

Company

Market Segments

Product Families

Projects

Taloja (Mumbai)

Rose Mirdamad

Waterproofing of Dolphinarium

Imam Khomeini Airport

Overview	Coating on Pipe Fittings- Anti Corrosion, Taloja (Mumbai)
Systems	Metal Prime II, Nukote HT @ 2mm DFT