Nukote Coating Systems' Elastomerics is a portfolio of flexible protective barrier coatings. 

Our elastomeric and polyurea coatings significantly outperform coatings traditionally used in the industry. Our comprehensive solutions combine cutting-edge products and robotic technologies with a global presence and exceptional capability from design and specification to product supply to deliver solutions that exceed our client's unique needs. See below for Technical and Safety Data Sheets and don’t hesitate to call for more information or a product estimate.

Nukote Coating Systems International has pioneered products and processes to create unparalleled quality, design life, and ease of application.  From Elastomeric and Ployurea Coatings to robotic applications, Nukote has solutions for your industry

The Nukote HLT® product line comes in a range of formulations designed to meet specific requirements, is applied in a single application, and leaves no surface residue. Nukote HLT® products can be used in conjunction with other Nukote elastomeric coatings to significantly reduce pinholes and expedite coating applications in wet climatic conditions. 

Nukote HLT® products include formulations for use as stand-alone treatments on concrete and masonry substrates. This range of products is based on colloidal silica chemistry providing the benefits of reduced concrete moisture entrainment, improved concrete hardness and density, and reduction or elimination of negative pressure or osmosis conditions common to concrete substrates.

Nukote HLT® product formulations deliver a permanent, passive, colloidal gel barrier within the substrate, significantly reducing; moisture transmission, surface loss due to abrasion, surface dusting, and water permeation. These benefits are achieved by denying positive or negative pressure or osmotic moisture transmission.

PP300 is a great choice when high tensile strength is needed. It can be applied in a variety of industrial facilities including power, manufacturing and mineral processing industries in addition to AWWA Type III and IV SAPL applications. Nukote PP300 is a two-component, 100% solids, hybrid polyurea with tensile properties that outperform typical coatings used in industrial applications. This aromatic Polyurea Elastomer displays good resistance to a broad range of chemicals including hydrogen sulfide, methane, excellent thermal stability, abrasion resistance and UV resistance.

Nukote PP300 is a specialized, high performance polyurea coating designed and developed to protect buried and exposed structures.

Nukote XT Plus is designed for acid and base environments and is a 100% solid flexible, aromatic, two component spray applied polyurethane polyurea. Nukote XT Plus is suitable where anaerobic and aerobic waste by-products combined with elevated temperatures are expected. The product is commonly specified in conjunction with other Nukote products in monolithic compositions or as a geotextile composite for applications in immersion as liner or in secondary containment of chemical storage tanks. This aromatic polyurea elastomer exhibits good long term chemical resistance, thermal stability and UV resistance.

Nukote XT Plus is a fast-set, rapid curing modified polyurea designed for use in application on concrete, steel or other substrates for protection against high acidic, alkaline chemicals in combination with moderate heat or pressure. 

Nukote PLC Plus has great adhesion and high impact-resistance that allow it to be utilized in the most severe environments. It is a direct‐to‐metal, quick‐set, two-component, polyurethane designed to protect pipelines from corrosion and abrasion that meets the requirements of AWWA C222.

Nukote PLC Plus is a high performance 100% solid structural polyurethane which is designed specifically for steel, ductile iron, and concrete pipe.

Nukote HAR is a two-component, 100% solids, modified polyurea that significantly outperforms general polyurea elastomers traditionally used in mining and industrial applications. Nukote HAR is suitable in applications which require very high abrasion in dry or wet conditions for lining the plant, conveyors, vehicle, screens, processing vessels as well as transmission lines. Nukote HAR is a unique rapid curing, flexible, two component spray elastomer exhibiting high wear-resistance properties. This aromatic Polyurea Elastomer displays good chemical resistance, thermal stability and UV resistance. Nukote HAR is suitable for application on steel, cement, GRP, FRP and other substrates in combination with suitable primer. This product outperforms 27% chrome iron in a slurry abrasion test and is highly recommended for applications in mineral and ore transportation to minimize hang and reduce carry back.

Nukote HAR is the premium modified polyurea available for industrial applications in severe and demanding applications that require very high abrasion resistance, combined with hydrolytic stability, high impact as well as tear resistance.

Nukote HT is a two-component, 100% solids, pure polyurea that significantly outperforms coatings traditionally used in transmission lines and industrial applications used in conjunction with cathodic protection systems. Nukote HT has been successfully tested and applied from Alaska's frozen tundra to Indonesia’s tropical jungle with outstanding results. Nukote HT is specifically formulated for application through NCSI-designed 360 RINGTECH® robotic pipe coating equipment as well as Nukote automated pipe lathes.

Nukote HTD is a modified version of Nukote HT suitable in applications requiring more flexural modulus, hardness and stiffness.

The Nukote HT (High Tensile) series are high performance polyureas designed and developed to protect buried, exposed pipelines. It performs well as an anticorrosion protective liner in many industrial applications on steel, concrete, GRP, FRP and many other substrates.

Adheres well to interior and exterior concrete, plywood and metal surfaces. Nukote BG may be applied in single or multiple applications. With compatible top coats, Nukote BG can be installed as a membrane for flooring systems in high traffic pedestrian, vehicular traffic, commercial and industrial floors, as well as roofing.

Nukote BG (brush grade) easy to use and does not require equipment. It is a two component, fast setting, flexible, high performance, high solids modified base membrane that can be applied manually by brush, roller or squeegee.

It is a two-component, 100% solids, fast set aromatic product and forms a hard and tough film with excellent resiliency. This aromatic elastomer displays good chemical resistance, outdoor durability, thermal stability, and abrasion resistance. Nukote CG can be textured easily for anti-skid purposes. It provides excellent adhesion to most substrates when used with a suitable Nukote primer.

Nukote CG is NCSI’s modified high performance polyurea hybrid designed and developed to perform well for anticorrosion and waterproofing applications on steel, concrete, fiberglass, wood, and many other substrates.

Nukote ST-M is a pure polyurea used where faster gelling time is desired to minimize outgassing and the resultant pinholes, excess sagging and for overhead applications. 

Nukote ST-PW is an ANSI/NSF 61 compliant and approved pure polyurea barrier material and also conforms to global migration Standard US – FDA: 21 CFR 175 – 300. Nukote ST-PW is tested and approved by many countries for applications on substrates in contact with potable water and food products.

These aromatic polyurea elastomers display good chemical resistance, thermal stability and UV resistance. The Nukote ST series can be textured easily for anti-skid purposes. These products have very good moisture permeation resistance and perform as an excellent barrier coating. They also provide excellent adhesion to most substrates when used with a suitable Nukote primer.

NUKOTE ST® is NCSI’s multipurpose high performance polyurea designed and developed to perform well for anticorrosion and waterproofing applications on steel, concrete, and many other substrates. ST is a two-component, 100% solids, pure polyurea that significantly reduces the moisture problems that commonly cause pinholing and blistering in most polyurethane, polyurethane-hybrid and other organic coating systems.

Nukote AL has very good moisture permeation resistance and performs as an excellent barrier coating. The product provides excellent adhesion to most substrates when used with a suitable Nukote primer.

Nukote AL is extremely color stable and displays excellent UV weathering characteristics, chemical resistance, high abrasion resistance, and gloss retention properties. It is a two-component, 100% solids, pure polyurea that significantly reduces the moisture problems that commonly cause pin holing and blistering in most polyurethane, polyurethane-hybrid and other organic coating systems.

Company

Market Segments

Product Families

Elastomeric